Hydration unit truck mounted manufactured in Germany, by GOES GmbH

In February 2017, GOES GmbH Successfully completed testing of a new generation Hydration Unit

IN FEBRUARY 2017 GOES SUCCESSFULLY COMPLETED TESTING OF A NEW GENERATION HYDRATION UNIT
This Unit was developed for one of the most progressive Russian service companies and will be delivered in the near future.
The main advantage of this Unit is it’s ability to safely operate with dry guar powder in “on-fly” mode. Guar powder is delivered from a 2,3 cu.m. guar tank using a twin chemical mixing system. Each chemical mixing system consists of it’s own dosing auger and water injection system. In addition, this two dosing systems are able to backup each other and provide simultaneous guar powder rate. Switching between dosing system possible in automatic mode and activated only by one button.
This unit is also equipped with hydration tanks, with a recirculation system, an all weather operator’s cabin and other modern features.
The New Hydration Unit is mounted on a Mercedes Benz Actros 8×8  chassis and is able to drive with full guar tanks and maintain a total axle load below 8 ton per axle.
This Unit powered by a chassis engine with an upgraded hydraulic system with very low noise levels during operation with full power.
Please contact us for more information.

Copyright © GOES GmbH 2021

Twin_acid_pumping_trailer_unit_2016_GOES

GOES GmbH delivers three Twin Acid Pump Trailer National Petroleum Services (NPS)

GOES DELIVERS THREE TWIN ACID PUMP TRAILER TO NATIONAL PETROLEUM SERVICES (NPS)

Recently NPS started operations with new acid pumps in Basra, Iraq.
These units are equipped with Caterpillar engines, Allison transmissions and SPM pumps. With Siemens based GOES control system and DMS (GOES Data Management System) it is an all-in-one solution for the client.
As they were the first units delivered to NPS, we maintained close contact with NPS’s operation team to make sure that all their requirements were integrated into the units and our products meet their expectations.
GOES provides in-house and on-site training for our customers.
For more information about NPS’s operations, please visit the NPS website (NESR).
Twin_acid_pumping_trailer_unit_2016_GOES

Copyright © GOES GmbH 2021

Nitrogen_pumping_truck_2016_GOES_Oilfield_Industry_Equipment

Nitrogen Units delivered to East European Clients

NITROGEN UNITS DELIVERED TO EAST EUROPEAN CLIENTS

In the last month GOES GmbH delivered four Nitrogen Pump Trucks, four Nitrogen-Transport Trailers and one Nitrogen Pump Trailer to East European Clients. All deliveries were made punctually to the customer’s warehouse.
The truck mounted 180k pump units come with a 2.000 GAL N2 tank and the N2 Pump Trailer comes with a 3.000 GAL tank.
All nine units have the same advantage that the pump skids and the tanks can be used on truck/trailer or can be removed easily for offshore operations.
The operator cabins can be removed to reduce the footprint even more.
 Please contact us for more information.
Nitrogen_pumping_truck_2016_GOES_Oilfield_Industry_Equipment

Copyright © GOES GmbH 2021

Frac Fleet manufactured by GOES withTatarstan_Russia_GOES

GOES GmbH delivers complete Frac Fleet to a client in Tatarstan, Russia

GOES GMBH DELIVERES COMPLETE FRAC FLEET TO CLIENT IN TATARSTAN, RUSSIA

Recently, GOES GmbH manufactured a frac fleet with a truck mounted frac spread consisting of 4 frac pumps, blender, data van, hot water unit, manifold truck and sand truck, and delivered it DDP, to a customer based in Russia.
The fleet was successfully commissioned and tested in Wesendorf, Germany. GOES specialists went to support and train our client during their first 10 jobs, as it was the first fracturing fleet for the Client.
All units are winterized, equipped with GOES Frac Control System and GOES Data Management System. More than 50 frac jobs have been completed within 4 months.
Photos: Fleet in Germany Prior to leaving for Russia
Frac Fleet manufactured by GOES withTatarstan_Russia_GOES

Copyright © GOES GmbH 2021

Twin_Cementing_Trailer_Irak_GOES

Twin Cementing Unit commisioned in Amarah, Iraq

TWIN CEMENTING UNIT COMMISIONED IN AMARAH, IRAQ

The twin cementing Trailer, with ADC, was fully tested at GOES testing facilities. The client came to an intensive 3 week training course after which a GOES service engineer commissioned this unit in Amarah, Iraq. Amarah is located between Baghdad and Basra.
The unit was delivered with a MAN pull truck, extensive HP iron and a spare parts package.
The unit is powered by three Deutz engines and built with Allison 4700 transmissions and SPM TWS 600 pumps.
We wish our client smooth operations and plenty of successful jobs with their new unit.
Twin_Cementing_Trailer_Irak_GOES

Copyright © GOES GmbH 2021

Coiled_tubing_Frac-Pumper_neftegaz_2016_GOES

GOES GmbH will attend NEFTEGAZ Exhibition

GOES GMBH WILL ATTEND NEFTEGAZ EXHIBITION

GOES GmbH will attend the Neftegaz exhibition, Moscow, Russia, from April 18th to 21th, 2016. We herewith kindly invite you to our booth 6-50 (outdoor area) for a chat, Ratzeputz or a German sausage.
We will exhibit the following two units:
1. Coiled Tubing Unit
Mounted on Mercedes Chassis, reel capacity of 6.200m of 1.5” string,      80k Coil Solutions injector, 3 1/16” Nexus BOP, Medco DAS.
2. Frac Pump Truck
MTU 12V4000S83 engine, Allison 9823 transmission, SPM TWS 2250 triplex pump.
Both units are available for sale and come with all required paperwork for Russian road registration and arctic package.
Please contact for more information info [a] goes-well.com
Photos: Units at GOES facility prior to leaving for Moscow
Coiled_tubing_Frac-Pumper_neftegaz_2016_GOES

Copyright © GOES GmbH 2021

Coiled_tubing_unit_2015_2_GOES

GOES GmbH delivers Coiled Tubing Unit package to Kazakhstan

GOES GMBH DELIVERS COILED TUBING UNIT PACKAGE TO KAZAKH CLIENT

Last Friday, one Truck mounted Coiled Tubing Unit and one Multi-Purpose Pumping Unit started their journey from Germany to Kazakhstan.
The compact CTU is mounted on a Terberg 8×8 chassis with a reel capacity of 7.000m/1. 5” string. The unique design allows the operator to leave the string in the injector during transport and the stripper is connected to the 80k injector, which reduces rig up time. Additionally the BOP can be carried on the unit.
The highly efficient MPPU, Multi-Purpose Pumping Unit, is a single pump truck with stainless steel tanks and a 3.5 million BTU heater allowing the unit to be used for coiled tubing jobs, hot oiling, acidizing and various other pumping operations, which is high efficiency.
Coiled_tubing_unit_2015_2_GOES

Copyright © GOES GmbH 2021

Data-Van-Trailer_Europe_GOES

New Data Van Trailer with slide-out lab delivered to an european client

NEW DATA VAN TRAILER WITH SLIDE-OUT LAB DELIVERED TO EUROPEAN CLIENT

Last week a new Data Van Trailer left our facilities after successful customer inspection. The data van is completely manufactured as per customer requirement, CE certified and as per European road regulations. This innovative design features:
  • Comfortable customer meeting area
  • Spacious laboratory area in the slide-out section
  • Pump controls from GOES remote control panels. (GOES also offers field proven touch screen technology for frac pump control)
  • GOES DMS (Data Management System) installed for reliable data recording & monitoring
  • Meyers and Associates Design and Simulation software
  • Real Time Data transfer
  • Showering system installed as per E&P companies requirements in case of acid spills
  • And of course, comfort features like AC, coffee machine, microwave and fridge etc.
Data-Van-Trailer_Europe_GOES

Copyright © GOES GmbH 2021

We are manufacturing cementing units for our clients.

Latest Twin Pump Cementing Trailer is ready

LATEST DOUBLE PUMP CEMENTING TRAILER IS READY

TWIN CEMENTING UNIT

A fully CE certified trailer mounted double pump cementing unit is ready for delivery at GOES facility in Wesendorf, Germany.
This unit is designed and manufactured for European oilfields and fully road legal in Europe. It is equipped with two TIER 4 deck engines, which are also used to run the hydraulics to save weight and costs.
The cementing unit is equipped with a recirculating cement mixing system, cement density control system, air-conditioned operator cabin and a displacement tank. The unit can be operated from the control panel, which includes all pneumatic, electrical and hydraulic controls and instrumentations for complete operations, either in automatic or manual mode.
We are manufacturing cementing units for our clients.

Copyright © GOES GmbH 2021

Coiled_tubing_unit_6_axle_2_GOES

GOES GmbH released 6 axles truck-mounted Coiled Tubing Unit

GOES GMBH RELEASED 6 AXLE TRUCK-MOUNTED COILED TUBING UNIT

6 AXLE COILED TUBING UNIT

This summer, GOES GmbH completed its most advanced one truck Coiled tubing unit. This 6 axle coiled tubing unit is a unique design. This one truck mounted CT unit carries the complete system which consists of Coiled tubing Reel, power pack, hydraulic hose reels and injector, stripper, BOP and high pressure parts. The optimally compacted design reduced two trucks into one truck.
  • Dimensions are as per customer request (LxWxH): 15m x 2,55m x 4,5m
  • This lightweight module is equipped with a thermal insulated telescopic operator’s cabin with a hydraulic lifting system to limit the height during transportation while providing the operator a comfortable working environment with full view during operation.
  • The modified special frame and the additional axles enable the unit to carry a maximum capacity of 24 of string on the truck
    o    2”- 4700m
    o    1,75”-6200m
    o    1.5” – 8500m
Additionally, some features have been added for security and efficiency.
  • A light system is provided with one searchlight for the injector and two portable floodlights for work area lighting.
  • Installation of video surveillance system with 3 cameras, recording device and monitor.
  • Foldable walkway with safety guard for easy and safe rig-up.

Copyright © GOES GmbH 2021