FRAC FLEET AT TEST - OILFIELD EQUIPMENT MANUFACTURED BY GOES
OILFIELD EQUIPMENT REFURBISHMENT
KEEP YOUR OLD EQUIPMENT COMPETITIVE !
After a few years of activity or a few thousands of working hours, you will notice that the Equipment with which you have worked day by day, is not perform as in the beginning, when you first purchase it. It is normal, some of its main components ended their life cycle or their performances drastically drop.
GOES GmbH can help bringing back your used Equipment to its initial performances! Write us an email at email@example.com and let us know what equipment needs to be refurbish.
No matter if you need a Frac Pump, Blender, Nitrogen, Chemical Unit or any other Oilfield Service Equipment, GOES has the upgrading solution.
FRAC FLEET MANUFACTURED FOR PEWETE EVO SERVICES LLC IN OMAN
LIQUID ADDITIVE SYSTEM - SKID MOUNTED
After a remote FAT was done at our testing facilities, GOES GmbH delivered a Liquid Additive Skid to a South East European Customer. This unit will be used during hydraulic fracturing operations.
This small LA Skid is equipped with 4 diaphragm style pumps for standard chemicals and one hose pump for viscous materials. All pumps come with Coriolis flowmeters.
A transport basket is included to carry the required hoses.
The skid comes with a remote control that can be installed in any Data Van. The Prime DMS Data Acquisition System is capable to import pump rates from a blender or C-pump which allows it to be fully process controlled. Besides this it is capable to import pressure pumping signals, so for many fracs it is all that is needed to meter chemicals on the fly, and record and display all pumping parameters.
It is specially designed for easy shipment to remote locations.
JUNE - MONTH OF THE FRAC PUMPS
FRAC PUMPING UNIT
June 2017 was the month of the frac pumps at GOES GmbH. Several units tested with our clients and have been shipped/ get ready for shipment.
Various configurations : MTU engines, Caterpillar engines as well as Caterpillar, Allison and ZF transmissions.
All designs are in place for truck, trailer and skid mounted needs.
INVITATION TO THE EXHIBITION "MIOGE-2017"
We invite you to visit our booth at the 14th international exhibition “OIL & GAS” / MIOGE 2017, which will be held from 27 to 30 June 2017 in the International Exhibition Center “Crocus Expo” in Moscow.
This year we will exhibit one of our latest developments- Pumping Unit FC-2251 with a capacity of 2500 HP. The following equipment is included:
– 2,500 HPEngine MTU 12V 4000 S83L
– Transmission ZF 8TX, power 2600 HP
– Quintuplex Pump SPM QWS 2500 with 4,5” plungers
This unit is equipped with a new revolutionary transmission ZF 8TX. The transmission was developed without using a torque converter which leads “smooth shifting” without lock-up function and also to reduce the weight.
The unit is mounted on a 10×8 Mercedes Benz Actros 4141 and has a total weight of 39,250 kg. The axle load does not exceed 8 tons per axle. All other dimensions are in accordance with Russian road regulations, too.
Please feel free to meet us and to discuss your existing projects and needs, to see new developments and capabilities of our companies in the field of equipment production for the oil and gas sector.
We look forward to seeing you at our booth number В238 in hall 14.
Official website of the exhibition http://www.mioge.ru/
IN FEBRUARY 2017 GOES SUCCESSFULLY COMPLETED TESTING OF A NEW GENERATION HYDRATION UNIT
This Unit was developed for one of the most progressive Russian service companies and will be delivered in the near future.
The main advantage of this Unit is it’s ability to safely operate with dry guar powder in “on-fly” mode. Guar powder is delivered from a 2,3 cu.m. guar tank using a twin chemical mixing system. Each chemical mixing system consists of it’s own dosing auger and water injection system. In addition, this two dosing systems are able to backup each other and provide simultaneous guar powder rate. Switching between dosing system possible in automatic mode and activated only by one button.
This unit is also equipped with hydration tanks, with a recirculation system, an all weather operator’s cabin and other modern features.
The New Hydration Unit is mounted on a Mercedes Benz Actros 8×8 chassis and is able to drive with full guar tanks and maintain a total axle load below 8 ton per axle.
This Unit powered by a chassis engine with an upgraded hydraulic system with very low noise levels during operation with full power.
Please contact us for more information.
GOES GMBH DELIVERES COMPLETE FRAC FLEET TO CLIENT IN TATARSTAN, RUSSIA
Recently, GOES GmbH manufactured a frac fleet with a truck mounted frac spread consisting of 4 frac pumps, blender, data van, hot water unit, manifold truck and sand truck, and delivered it DDP, to a customer based in Russia.
The fleet was successfully commissioned and tested in Wesendorf, Germany. GOES specialists went to support and train our client during their first 10 jobs, as it was the first fracturing fleet for the Client.
All units are winterized, equipped with GOES Frac Control System and GOES Data Management System. More than 50 frac jobs have been completed within 4 months.
Photos: Fleet in Germany Prior to leaving for Russia
GOES GMBH WILL ATTEND NEFTEGAZ EXHIBITION
GOES GmbH will attend the Neftegaz exhibition, Moscow, Russia, from April 18th to 21th, 2016. We herewith kindly invite you to our booth 6-50 (outdoor area) for a chat, Ratzeputz or a German sausage.
We will exhibit the following two units:
1. Coiled Tubing Unit
Mounted on Mercedes Chassis, reel capacity of 6.200m of 1.5” string, 80k Coil Solutions injector, 3 1/16” Nexus BOP, Medco DAS.
2. Frac Pump Truck
MTU 12V4000S83 engine, Allison 9823 transmission, SPM TWS 2250 triplex pump.
Both units are available for sale and come with all required paperwork for Russian road registration and arctic package.
Please contact for more information info [a] goes-well.com
Photos: Units at GOES facility prior to leaving for Moscow
NEW DATA VAN TRAILER WITH SLIDE-OUT LAB DELIVERED TO EUROPEAN CLIENT
Last week a new Data Van Trailer left our facilities after successful customer inspection. The data van is completely manufactured as per customer requirement, CE certified and as per European road regulations. This innovative design features:
Comfortable customer meeting area
Spacious laboratory area in the slide-out section
Pump controls from GOES remote control panels. (GOES also offers field proven touch screen technology for frac pump control)
GOES DMS (Data Management System) installed for reliable data recording & monitoring
Meyers and Associates Design and Simulation software
Real Time Data transfer
Showering system installed as per E&P companies requirements in case of acid spills
And of course, comfort features like AC, coffee machine, microwave and fridge etc.