GOES GmbH – Oilfield Equipment for Rental and for Sale

Besides new manufactured oilfield equipment, we offer rentals and have surplus equipment for sale.

Our rental equipment may also be available for purchase.

Please choose below the rental or the sale equipment and you will be directed to the parts that we currently have available.

This list is updated continously, so please check it regularly to avoid missing a deal.

We are offering new or used Oilfield Equipment : Frac Pumps (Equipment used in fracking), Frac Blenders, Sand Kings, Data Vans, Twin or Single Pump Skids, Containers or Trailers, Nitrogen Pumping Units Truck mounted, Trailer or N2 Skids, Wireline Units, Hydration and Chemical Units, Yard Spoolers, and many other.

Let us know what you would need, and our people will direct you to the right Equipment.

Feel free to contact us for any information regarding new or used Oilfield Equipment.

Trailer mounted 2250 BHP Frac Pumping Unit suitable for Gas/Oil Fracturing operations.

We have few Frac Pumps available for rental.

Horizontal Frac Radiator with Hydraulic Fan Drive
3” Fig 1502, 15,000 PSI (103 mPa)
150 PSI (1.03 mPa) with Suction Pulsation Dampner
Grease Lube System
Control Enclosure/Panel with Local and Remote Control

Multimple Frac Pump Trailers available for rent or sale in Germany.

FRAC PUMP TRAILER FOR SALE OR RENT MULTIPLE FRAC PUMP TRAILERS AVAILABLE FOR RENT OR SALE IN GERMANY.

Trailer mounted 2250 BHP Frac Pumping Unit suitable for Gas/Oil Fracturing operations in the Middle Eastern Oil and Gas fields and for towing via a fifth wheel Trailer attachment by a suitable CUSTOMER supplied Truck Tractor.

This Unit is be capable of operating in an ambient temperature range of 0 Deg C to +55 Deg C. (32 Deg F to +131 Deg F).

This Unit may be controlled locally from a Unit Mounted Digital Control System or remotely at a distance of up to 50 m (165 feet) via a Data Cable from the Unit by a Portable Control Module.

Two Frac Pump Trailers available for sale in Saudi Arabia.

FRAC PUMP TRAILER FOR SALE 2 FRAC PUMP TRAILERS AVAILABLE FOR SALE IN SAUDI ARABIA.

This Frac Pump Trailer has the following configuration : Engine MTU 12V 4000 S83, Transmission Allison 9832i. For triplex Pump, the client can choose between the used SPM TWS 2250 (max 200h) and new Quintuplex Pump with Carbon or Stainless Steel Fluid End.

This Frac Pump Trailer It is built for severe environmental conditions ranging from -40C to + 40C

Various Units available in Europe for sale.

FRAC PUMP TRAILER FOR SALE VARIOPUS FRAC PUMP TRAILERS AVAILABLE FOR SALE IN EUROPE.

The Coiled Tubing Tower is designed for supporting the injector head which is mounted on top of the lift frame.

The tower is often in use to deploy longer tool strings and remove the axial load from the wellhead. The tower components consist of the base frame, onto which various intermediate segments are fitted to achieve variable heights.

The lift frame on top of the intermediate segments is for holding the injector and can move vertical up to 700 mm for a quick and safe tool string change.

• Base frame – The main support feet are adjustable and the inside support feet are height adjustable via spindles.
• Base segment, 3100 mm – 5100 mm
• Intermediate segments, 2,500 mm height (6 intermediate segments available )
• Lift frame for injector, height adjustable via hydraulic cylinders up to 700 mm

• Hydraulic control panel – lift frame

The joint / synchronous actuation of the four lift cylinders is performed from a control panel.

ATEX 94/9/EC – Ex II 2G c IIB T3
Electric Mining Ordinance – ElBergV-
Deep drilling ordinance – BVOT
Machinery directive 2006/42/EC

Dimensions

Length: 6200mm
Width: 2680 mm
Height: 12548 mm min – 23276 mm max. rig up height
Total Weight: ~ 22900 kg

COILED TUBING TOWER FOR SALE OR RENT ONE UNIT AVAILABLE AT GOES.

Manufactured by GOES GmbH, this pumping unit is a trailer mounted, single pump unit with a high performance engine, transmission and high pressure positive displacement Quintuplex pump.

The Unit can be remotely operated either from a remote control module or from the data van through a Mobile Computerized Data Acquisition and Control Unit.

Axle load of loaded (ready for operation) Unit does not exceed 8 tons per axle. The load to the fifth wheel of tractor is no more than 8 tons.

The unit described in this specification is designed and built for severe environmental conditions ranging from -40°C to + 40°C.

Various Units available at GOES.

FRAC PUMP TRAILER FOR SALE VARIOUS FRAC PUMP TRAILERS AVAILABLE AT GOES.

This carbon steel tank trailer is designed to store acid, water for frac sites or groundwater remediation projects. It is easy to move, clean and suitable to store 83 m³ of liquid.

2 Units available in Europe for rent only.

ACID FRAC TANKS FOR RENT 2 ACID FRAC TANKS AVAILABLE FOR RENT IN EUROPE.

The 500hp Pump unit is mounted inside the 20’ container and designed for operations in rough oilfield environments. Each component of the pump unit is selected to provide optimum performance, considering operating conditions and serviceability, which is available for rental now.

For high pressure pumping or fluid circulation
Support different type of well service interventions
Used for high-pressure liquid carbon dioxide pumping,
acidizing, cementing operations, pressure testing, etc.
Engine pre-heaters for extreme weather conditions
Remote control
CE conformity

Various Units available in Europe.

UNIT FOR RENT VARIOUS UNITS AVAILABLE IN EUROPE.

This Trailer Mounted Twin Pumping Unit is capable of holding, mixing and pumping INHIBITED acids and other well servicing fluids into oil and gas wells. This Unit is suitable for towing via a fifth wheel attachment by customer supplied Truck Tractor.

A Control Cabin mounted towards the rear of the Trailer in between the Displacement Tanks and the High Pressure Pumps
An Operators Platform allow access to the Control Cabin and the Displacement Tank.
Displacement Tank mounted directly behind the Control Cabin to facilitate operator access and line of sight from controls.
The two Unit Power Packages are mounted in a side by side configuration at the front of the Trailer lower deck with the drivelines toward the rear of the Unit.
The High Pressure Pumps are direct driven from the Power Packages and be mounted at the rear of the Unit.
The High and Low Pressure Manifolds and Piping are integrated within the Unit for accessibility and minimal flow restrictions. Piping discharge at the rear of the Trailer.
Good access to solenoid valves and filters and dipsticks
Drain ports and loading aperture for oil to outside (good access)

1 Carrier Tandem (2) Axle fixed gooseneck, “single drop”trailer
2 Diesel Engines CAT C15 ACERT rated a maximum of 595 BHP @2100 RPM
2 Transmissions Allison 4700 OFS
2 Cooling Systems Vertical radiator with Mechanical Fan Drive
2 High Pressure Pumps SPM TWS 600S HD (Compact Version)
High Pressure Piping : 2” Fig 1502, 15,000 PSI (103 mPa)
Low Pressure Piping : 150 PSI (1.03 mPa)
Displacement Tank 20 BBL (3.2 m3) Total Capacity, 2 Compartments
2 Boost/Fill Pumps GD 6” x 5” x 11” Centrifugal
Control System Control Cabin with Control Console for Local Controls and GOES Data Acquisition

One Unit available in Europe.

UNIT FOR SALE ONE UNIT AVAILABLE AT GOES.

The units are designed for cased hole slickline and wireline services on offshore platforms with max. 0.160 slickline wire or max 1/4 single conductor cable or braided line.

- 8,5 ton offshore container frame
- Dual drum Slickline / Wireline winch
- High performance closed loop hydraulic drive
- 20” three sheave counter head
- Digital ex-proof winch operator panel
- Digital ex-proof back up depth panel
- BOP / Wireline Valve control panel with hydraulic accumulators
- Caterpillar C4.4 Diesel engine with 80 hp / 59 kW
- Pyroban hazardous area engine modification (exhaust gas cooler with suitable engine water cooler, flame traps, air inlet shut down valve, over-speed shut down, low oil pressure shut down, cooling water temperature shut down, exhaust gas temperature shut down, anti-static belts, anti-static fan, etc.)
- Ex-proof air starter system
- Ex proof electric system
- Insulated engine and operator section
- Rig energy supply connection

Year of Manufacture : 2022

Working Hours : on request

CE marking / Declaration of conformity ATEX 2014/34/EU directive (Zone 2) and 2006/42/EC machinery directive
DNVGL-ST-E271 offshore container certificate issued by Lloyd’s Register

We have it on stock. Please ask for a quote.

UNIT FOR SALE ONE UNIT AVAILABLE AT GOES in GERMANY.

Skid Mounted 180K – 10K PSI Heat Recovery Nitrogen Pumping Unit that may be used on Nitrogen Pumping onshore operations requiring the injection of gaseous nitrogen at pressures of up to 10,000 PSI (69 mPa). This Unit may be controlled locally from the Control Console installed on the Unit

Triplex Pump equipped with 1.625” (1 5/8”) Cold Ends
Gaseous nitrogen rates up to 180,000 SCFH/85 m3/min
Working pressures up to 10,000 PSI/69 mPa
Gaseous nitrogen discharge temperatures up to 15 to 21 Deg °C

Heavy duty skid/protection frame
Diesel Engine : CAT C13 ACERT rated a minimum of 475 BHP @ 2100 RPM
Cooling System : Vertical radiator with Mechanical Fan Drive
Power Transmission : Multi-output drive gearbox
Hydraulic Drive System : Closed and open loop hydraulic systems
Triplex Pump : ACD 3-GUPD (or equivalent) Cryogenic Type Pump
LN2 Boost Pump : ACD18 (or equivalent) 1 ½” x 2 1/2” x 6” hydraulically driven centrifugal pump
LN2 Vaporization System : Non fired (heat recovery) type with Hydraulic Pump make-up Diesel Engine loading system and Water Bath type Vaporizer
Auxiliary Coolant Pump : Centrifugal type pump
Low Pressure Piping : Stainless steel
High Pressure Piping : 103 mPa (15,000 PSI) stainless steel/2” Fig 1502
Controls System and Instrumentation : Local Control and Data Acquisition

One Unit available in Europe.

NITROGEN PUMPING UNIT MOUNTED ON SKID ONE UNIT AVAILABLE FOR SALE.

The Unit configuration will include the following features:

This Unit may be controlled locally from a Unit Mounted Digital Control System
The Unit Power Package will be centrally mounted at the front of the Skid with the drivelines directed toward the rear of the Unit.
The Triplex Pump will be direct driven from the Power Package and be mounted at the rear of the Unit.
The High and Low Pressure Manifolds and Piping will be integrated within the Unit for accessibility and minimal flow restrictions. Piping will discharge at the rear of the Unit.

Heavy duty skid/lift frame
CAT C15 ACERT rated a minimum of 595 BHP @ 2100 RPM
Allison 4700 OFS Transmission
Hydraulic System : Open Loop
Triplex Pump : SPM 600S HD (Compact Version) Triplex
High Pressure Pipin : 2” Fig 1502, 15,000 PSI (103 mPa)
Low Pressure Piping : 150 PSI (1.03 mPa)
Boost pump : Mission Magnum Type 4” x 3” x 13” Centrifugal
Control Console, Local Controls and Data Acquisition

One Unit available in KSA.

SINGLE PUMP UNIT SINGLE PUMP UNIT, RIG ZONE, AVAILABLE FOR SALE IN KSA

Soundproof
Twin Pump, optional remote controlled
Mixing device on board
Reliable & field-proven
Data-Acquisition
Manufactured according to Machinery directive 2006/42/EC Annex 1, Part 2A
CE certified

Carrier : 1 Tandem (2) Axle fixed gooseneck, “single drop” trailer
Engine : 2 x Caterpillar C13, rated 387kW @ 2100 RPM
Transmission : 2 x Caterpillar CX 31
Vertical Radiator with Hydraulic Fan Drive
Drive Line - Cardan Series
Triplex Pump : TWS 600, 2,75” Plunger
Centrifugal pump : 5"x4"
1 x 4m3 Batch mix tank 2 x 1500l trip tank
Low Pressure Piping : 150 PSI (1.03 mPa)
High Pressure Piping : 2” Fig 1502, 15,000 PSI (103 mPa)
Plunger Lubrication : Oil Lube System
Control Enclosure/Panel with Local and Remote Control incl. DAS

One Unit available in Europe.

TWIN PUMPING TRAILER UNIT AVAILABLE FOR SALE OR RENTAL IN EUROPE.

The skid mounted Nitrogen tank is Cryogenic Offshore Vessel, suitable for storage Nitrogen for easy operation and safety transportation.

Inner vessel material: 304/304L stainless steel
Outer vessel material: ST52
Super insulation
NER (Normal Evaporation Rate): 0.60 N2% / day maximum
Third party certification available
DNV certified

4 Units available in Europe.

SALE OR RENTAL 4 UNITS AVAILABLE IN EUROPE FOR SALE OR RENTAL.

This “Serviced/Tested” Skid Mounted Twin Pumping Unit is suitable for onshore/offshore operations and for use in an ambient temperature range of 0 Deg C to +40 Deg C. (32 Deg F to +104 Deg F).

Heavy duty skid/protection frame
Two room, insulated
Detroit Diesel 12V71
Vertical radiator with Mechanical Fan Drive
HT400 High pressure pums
Control Console with Local Controls

One Twin Pump Skid available in Europe.

HT400 SKID FOR SALE WE HAVE ONE HT400 SKID FOR SALE OR RENT IN GERMANY.

Batch Mixer for Cementing Operations

2 x 10 m3 Batch Mixer
Rig Electric Power Supply
Paddles 2 x 7,5 kW (400 V)
Mission Boost Pump 1 x 55 kW (400 V)
3" Bulk Cement Line
Circulation Manifold
4" Suction Hoses

One Batch Mixer available in Europe.

BATCH MIXER FOR SALE ONE UNIT AVAILABLE.

List of Products

GOES GMBH

Muenchener Strasse 32
29392 Wesendorf
Germany +49 5376 97647 – 0
+49 5376 97647 – 90
www.goes-well.com
info[at]goes-well.com

Legal Notice / Data Protection

KATT GMBH

Vorbruch 6
29227 Celle
Germany +49 5141 9895 – 0
+49 5141 9895 – 60
www.katt-gmbh.com
info[at]katt-gmbh.com

Careers

GOES GmbH – Oilfield Equipment for Rental and for Sale

Besides new manufactured oilfield equipment, we offer rentals and have surplus equipment for sale.

Our rental equipment may also be available for purchase.

Please choose below the rental or the sale equipment and you will be directed to the parts that we currently have available.

This list is updated continously, so please check it regularly to avoid missing a deal.

Let us know what you would need, and our people will direct you to the right Equipment.

Feel free to contact us for any information regarding new or used Oilfield Equipment.

Trailer mounted 2250 BHP Frac Pumping Unit suitable for Gas/Oil Fracturing operations in the Middle Eastern Oil and Gas fields and for towing via a fifth wheel Trailer attachment by a suitable CUSTOMER supplied Truck Tractor.

This Unit is be capable of operating in an ambient temperature range of 0 Deg C to +55 Deg C. (32 Deg F to +131 Deg F).

This Unit may be controlled locally from a Unit Mounted Digital Control System or remotely at a distance of up to 50 m (165 feet) via a Data Cable from the Unit by a Portable Control Module.

Two Frac Pump Trailers available for sale in Saudi Arabia.

This Frac Pump Trailer has the following configuration : Engine MTU 12V 4000 S83, Transmission Allison 9832i. For triplex Pump, the client can choose between the used SPM TWS 2250 (max 200h) and new Quintuplex Pump with Carbon or Stainless Steel Fluid End.

This Frac Pump Trailer It is built for severe environmental conditions ranging from -40C to + 40C

Various Units available in Europe for sale.

The Coiled Tubing Tower is designed for supporting the injector head which is mounted on top of the lift frame.

The tower is often in use to deploy longer tool strings and remove the axial load from the wellhead. The tower components consist of the base frame, onto which various intermediate segments are fitted to achieve variable heights.

The lift frame on top of the intermediate segments is for holding the injector and can move vertical up to 700 mm for a quick and safe tool string change.

• Hydraulic control panel – lift frame

The joint / synchronous actuation of the four lift cylinders is performed from a control panel.

ATEX 94/9/EC – Ex II 2G c IIB T3

Electric Mining Ordinance – ElBergV-

Deep drilling ordinance – BVOT

Machinery directive 2006/42/EC

Dimensions

Length: 6200mm

Width: 2680 mm

Height: 12548 mm min – 23276 mm max. rig up height

Total Weight: ~ 22900 kg

Manufactured by GOES GmbH, this pumping unit is a trailer mounted, single pump unit with a high performance engine, transmission and high pressure positive displacement Quintuplex pump.

The Unit can be remotely operated either from a remote control module or from the data van through a Mobile Computerized Data Acquisition and Control Unit.

Axle load of loaded (ready for operation) Unit does not exceed 8 tons per axle. The load to the fifth wheel of tractor is no more than 8 tons.

The unit described in this specification is designed and built for severe environmental conditions ranging from -40°C to + 40°C.

Various Units available at GOES.

This carbon steel tank trailer is designed to store acid, water for frac sites or groundwater remediation projects. It is easy to move, clean and suitable to store 83 m³ of liquid.

2 Units available in Europe for rent only.

The 500hp Pump unit is mounted inside the 20’ container and designed for operations in rough oilfield environments. Each component of the pump unit is selected to provide optimum performance, considering operating conditions and serviceability, which is available for rental now.

For high pressure pumping or fluid circulation

Support different type of well service interventions

Used for high-pressure liquid carbon dioxide pumping,

acidizing, cementing operations, pressure testing, etc.

Engine pre-heaters for extreme weather conditions

Remote control

CE conformity

Various Units available in Europe.

This Trailer Mounted Twin Pumping Unit is capable of holding, mixing and pumping INHIBITED acids and other well servicing fluids into oil and gas wells. This Unit is suitable for towing via a fifth wheel attachment by customer supplied Truck Tractor.

A Control Cabin mounted towards the rear of the Trailer in between the Displacement Tanks and the High Pressure Pumps

An Operators Platform allow access to the Control Cabin and the Displacement Tank.

Displacement Tank mounted directly behind the Control Cabin to facilitate operator access and line of sight from controls.

The two Unit Power Packages are mounted in a side by side configuration at the front of the Trailer lower deck with the drivelines toward the rear of the Unit.

The High Pressure Pumps are direct driven from the Power Packages and be mounted at the rear of the Unit.

The High and Low Pressure Manifolds and Piping are integrated within the Unit for accessibility and minimal flow restrictions. Piping discharge at the rear of the Trailer.

Good access to solenoid valves and filters and dipsticks

Drain ports and loading aperture for oil to outside (good access)

One Unit available in Europe.

The units are designed for cased hole slickline and wireline services on offshore platforms with max. 0.160 slickline wire or max 1/4 single conductor cable or braided line.

8,5 ton offshore container frame

Dual drum Slickline / Wireline winch

High performance closed loop hydraulic drive

20” three sheave counter head

Digital ex-proof winch operator panel

Digital ex-proof back up depth panel

BOP / Wireline Valve control panel with hydraulic accumulators

Caterpillar C4.4 Diesel engine with 80 hp / 59 kW

Ex-proof air starter system

Ex proof electric system

Insulated engine and operator section

Rig energy supply connection

Year of Manufacture : 2022

Working Hours : on request

CE marking / Declaration of conformity ATEX 2014/34/EU directive (Zone 2) and 2006/42/EC machinery directive

DNVGL-ST-E271 offshore container certificate issued by Lloyd’s Register

We have it on stock. Please ask for a quote.

Skid Mounted 180K – 10K PSI Heat Recovery Nitrogen Pumping Unit that may be used on Nitrogen Pumping onshore operations requiring the injection of gaseous nitrogen at pressures of up to 10,000 PSI (69 mPa). This Unit may be controlled locally from the Control Console installed on the Unit

Triplex Pump equipped with 1.625” (1 5/8”) Cold Ends

Gaseous nitrogen rates up to 180,000 SCFH/85 m3/min

Working pressures up to 10,000 PSI/69 mPa

Gaseous nitrogen discharge temperatures up to 15 to 21 Deg °C

One Unit available in Europe.

The Unit configuration will include the following features:

This Unit may be controlled locally from a Unit Mounted Digital Control System